Clear Snmp Notify; Show Snmp Notifyfilter - Enterasys SECURESTACK C3 Configuration Manual

If not specified, storage type will be set to nonvolatile.
Mode
Switch command, read‐write.
Example
This example shows how to set an SNMP notify configuration with a notify name of "hello" and a
notify tag of "world". Notifications will be sent as trap messages and storage type will
automatically default to permanent:
C3(su)->set snmp notify hello tag world trap

clear snmp notify

Use this command to clear an SNMP notify configuration.
Syntax
clear snmp notify notify
Parameters
notify
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to clear the SNMP notify configuration for "hello":
C3(su)->clear snmp notify hello

show snmp notifyfilter

Use this command to display SNMP notify filter information, identifying which profiles will not
receive SNMP notifications.
Syntax
show snmp notifyfilter [profile] [subtree oid-or-mibobject] [volatile |
nonvolatile | read-only]
Specifies an SNMP notify name to clear.
clear snmp notify
SecureStack C3 Configuration Guide 8-33