Commands; Show Maclock - Enterasys SECURESTACK C3 Configuration Manual

show maclock

Commands

For information about...
show maclock
show maclock stations
set maclock enable
set maclock disable
set maclock
clear maclock
set maclock static
clear maclock static
set maclock firstarrival
clear maclock firstarrival
set maclock agefirstarrival
clear maclock agefirstarrival
set maclock move
set maclock trap
show maclock
Use this command to display the status of MAC locking on one or more ports.
Syntax
show maclock [port-string]
Parameters
port‐string
Defaults
If port‐string is not specified, MAC locking status will be displayed for all ports.
Mode
Switch command, read‐only.
Example
This example shows how to display MAC locking information for
C3(su)->show maclock ge.1.1
MAC locking is globally enabled
Port
Number
26-58 Authentication and Authorization Configuration
(Optional) Displays MAC locking status for specified port(s). For a
detailed description of possible port‐string values, refer to "Port String
Syntax Used in the CLI" on page 7‐1.
Port Trap Aging
Status Status Status
ge
Max Static Max FirstArrival
Allocated Allocated
Refer to page...
26-58
26-59
26-60
26-61
26-61
26-62
26-63
26-63
26-64
26-65
26-65
26-66
26-66
26-67
.1.1.
Last Violating
MAC Address