Clear Dhcp Conflict - Enterasys SECURESTACK C3 Configuration Manual

clear dhcp conflict

Mode
Read‐only.
Example
This example displays conflict information for all addresses. Note that ping is the only detection
method used.
C3(ro)->show dhcp conflict
IP address
-----------
192.0.0.2
192.0.0.3
192.0.0.4
192.0.0.12
clear dhcp conflict
Use this command to clear conflict information for one or all addresses, or to disable conflict
logging.
Syntax
clear dhcp conflict {logging | ip-address| *}
Parameters
logging
ip‐address
*
Defaults
None.
Mode
Switch command, read‐write.
Examples
This example disables DHCP conflict logging.
C3(rw)->clear dhcp conflict logging
This example clears the conflict information for the IP address 192.0.0.2.
C3(rw)->clear dhcp conflict 192.0.0.2
16-6 DHCP Server Configuration
Detection Method
-----------------
Ping
Ping
Ping
Ping
Disables conflict logging.
Clears the conflict information for the specified IP address.
Clears the conflict information for all IP addresses.
Detection Time
---------------
0 days 19h:01m:23s
0 days 19h:00m:46s
0 days 19h:01m:25s
0 days 19h:01m:26s