Example
This example creates a stub area with the ID of 30.
C3(su)->router(Config-router)# area 30 stub
area stub no-summary
This command disables the import of summary LSAs into the specified stub area.
Syntax
area areaid stub no-summary
no area areaid stub no-summary
Parameters
areaid
Defaults
None.
Mode
Router OSPFv3 configuration: C3(su)‐>router(Config‐router)#
Usage
Use the no form of this command to set the summary LSA import mode to the default for the
specified stub area.
Example
The example disables the import of summary LSAs into stub area 30.
C3(su)->router(Config-router)# area 30 stub no-summary
area virtual-link
This command creates the OSPFv3 virtual interface for the specified area and neighbor.
Syntax
area areaid virtual-link neighborid
no area areaid virtual-link neighborid
Parameters
areaid
neighborid
Specifies the area ID in IP address format (dotted‐quad) or as a decimal
value.
Specifies the area ID in IP address format (dotted‐quad) or as a decimal
value.
Specifies the virtual link neighbor by means of its router ID. The router
ID must be entered in 32‐bit dotted‐quad notation.
area stub no-summary
SecureStack C3 Configuration Guide 25-17