7.2.1.3
clear port priority
Use this command to reset the current 802.1D port priority setting to 0. This will cause all frames
received without a priority value in its header to be set to priority 0.
clear port priority port_string
Syntax Description
port_string
Command Defaults
None.
Command Mode
Read-Write.
Example
This example shows you how to reset Gigabit Ethernet front panel port 11 to the default priority.
Matrix>clear port priority ge.0.11
Port priority reset to 0 for ge.0.11.
Specifies the port for which to clear priority. For a detailed
description of possible port_string values, refer to
Section
4.1.2.
Matrix E1 Series (1G694-13) Configuration Guide
Port Priority Configuration
Configuring Port Priority
7-5