Upgrade Fpga-Image System Fpga Booted - Dell Z9500 Reference Manual

CP
************************************************************
* Warning - Upgrading FPGA is inherently risky and should
* only be attempted when necessary. A failure at this upgrade
may *
* cause a board RMA. Proceed with caution !
************************************************************
***********************************************************
* When the upgrade has successfully completed, the system will
be *
* automatically rebooted to reload the upgraded
components.
************************************************************
Upgrade CPLD image for system [yes/no]: yes
FPGA upgrade in progress!!! Please do NOT power off the unit
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Usage Do not restart the switch while an upgrade is progressing. Restarting the chassis
Information during an upgrade may corrupt critical boot components.
When an upgrade of CPLD devices successfully completes, the switch reloads
automatically.
Related
•
Commands

upgrade fpga-image system fpga booted

Use this command to upgrade the FPGA devices in the Z9500 Route Processor and Control Processor
CPUs using the currently running Dell Networking operating-system image (and only when required by
the upgrade procedure in the Z9500 release notes).
Z9500
Syntax
upgrade fpga-image system fpga booted
Defaults none
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
File Management
SYSTEM CPLD
*
upgrade fpga-image system fpga
CPUs.
0x07 0x08
— upgrades the CPLD devices in all Z9500
*
*
81