Upgrade Fpga-Image System Fpga Booted - Dell Z9500 Command Reference Manual

* automatically rebooted to reload the upgraded
components.
************************************************************
Upgrade CPLD image for system [yes/no]: yes
FPGA upgrade in progress!!! Please do NOT power off the unit
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Usage Do not restart the switch while an upgrade is progressing. Restarting the chassis
Information during an upgrade may corrupt critical boot components.
When an upgrade of CPLD devices successfully completes, the switch reloads
automatically.
Related
•
Commands

upgrade fpga-image system fpga booted

Use this command to upgrade the FPGA devices in the Z9500 Route Processor and Control Processor
CPUs using the currently running Dell Networking operating-system image (and only when required by
the upgrade procedure in the Z9500 release notes).
Z9500
Syntax
upgrade fpga-image system fpga booted
Defaults none
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
9.0.0.0
Example
Dell# upgrade fpga-image system fpga booted
Current FPGA information in the system:
=======================================
Card
82
*
upgrade fpga-image system fpga
CPUs.
Description
Introduced on the Z9500.
Introduced on the Z-Series.
FPGA Name
— upgrades the CPLD devices in all Z9500
Current Version New Version
File Management