Show Boot - Dell PowerConnect W-7200 Series Reference Manual

show boot

show boot
Description
Display boot parameters, including the boot partition and the configuration file to use when booting the controller.
Syntax
No parameters.
Example
(host) # show bootConfig File: default.cfg
Boot Partition: PARTITION 1
Related Commands
Configure boot parameters using the command boot.
Command History
This command was available in ArubaOS 1.0.
Command Information
Platforms
All platforms
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Licensing
Base operating system
Command Mode
Config or Enable mode on master or local
controllers
show boot | 913