Match Metric-Type - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

match metric-type

match metric-type { external | internal }
Syntax
no match metric-type [ external | internal ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
Matches routes having the specified metric type. The no version removes the match
Description
clause from a route map.
Options
Policy List Configuration, Route Map Configuration
Mode
external Specifies IS-IS external metric type
internal Specifies IS-IS internal metric type
Chapter 13: M Commands
1269
match metric-type