Table of Contents
Advertisement
JUNOSe 11.0.x Command Reference Guide A to M
frame-relay lmi-t392dce
frame-relay lmi-t392dce seconds
Syntax
no frame-relay lmi-t392dce
Command introduced before JUNOSe Release 7.1.0.
Release Information
Sets the polling verification timer (T392) on a DCE interface. The no version removes
Description
current setting and sets the default.
Options
Interface Configuration
Mode
636
frame-relay lmi-t392dce
seconds—Number in the range 5–30 seconds; specifies the expected interval in
seconds between status inquiries issued by the DTE equipment; default value is
15 seconds
Advertisement
Table of Contents
Need help?
Do you have a question about the JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 and is the answer not in the manual?
Questions and answers