Table of Contents
Advertisement
frame-relay lmi-t391dte
frame-relay lmi-t391dte seconds
Syntax
no frame-relay lmi-t391dte
Command introduced before JUNOSe Release 7.1.0.
Release Information
Sets the link integrity verification polling timer (T391) on a DTE interface. The no
Description
version removes the current setting and sets the default.
Options
Interface Configuration
Mode
seconds—Number in the range 5–30 seconds; specifies the interval in seconds
between status inquiries issued by the DTE; default value is 10 seconds
Chapter 7: F Commands
frame-relay lmi-t391dte
635
Advertisement
Table of Contents
Need help?
Do you have a question about the JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 and is the answer not in the manual?
Questions and answers