Set System; Set Syslog <Ip_Address> Loglevel [Level]; Set Time <Time; Set Tunnel <Tunnel_Name - 3Com OfficeConnect Remote 812 Cli User's Manual

B-34 A B: CLI C
PPENDIX OMMAND

set system

set syslog <ip_address>
loglevel [level]
set time <time>
set tunnel
<tunnel_name>
D
ESCRIPTION
name ["name"]


location ["location"]


contact ["contact info"]


transmit_authentication_name [name]


Specifies system contact information, which is displayed using show system. The
user name is the remote account name. Location, name and contact names are
limited to 64 characters.
Parameter
name
location
contact
transmit_
authentication_name
Sets the error reporting level for syslog entries that will be sent to the specified IP
address. You must have previously defined this syslog IP address using add syslog.
There are five levels of logging:
CRITICAL - a serious system error, which may effect system integrity


UNUSUAL - an abnormal event, which the system should recover from


COMMON - a regularly occurring event that is not frequent


VERBOSE - a regular periodic event, e.g. a routing update message


DEBUG - for debugging only


Sets the system time, and leaves the date unchanged. Use show date to see what
the current settings are. The format is: hh:mm:ss. The seconds field is optional.
Modifies tunnel parameters.
The following is a list of set tunnel parameters and supported values:
Table 6-7 812 Set Tunnel Parameters and Supported Values
Parameter
ENCRYPTION_ALGORYTHM
MTU
TUNNEL_TYPE
INPUT_FILTER
OUTPUT_FILTER
PASSWORD
Description
A name identifying the user to the system.
The location of the user.
The information contact for the user.
Deprecated
Supported Value
NONE
1400
PPTP, L2TP
<filter_name>
<filter_name>
<password>
Remarks
PPTP is the default.