Subaru IMPREZA GD 2007 Series Manual page 4012

asieps_tobira_IM_US.book 29 ページ ２０１２年１月１７日 火曜日 午後３時４８分
22.Rear Turn Signal Light Bulb
A: REMOVAL
1. SEDAN MODEL
1) Remove the trunk side trim of rear portion.
2) Turn the socket and remove the bulb.
2. WAGON MODEL
1) Remove the rear combination light assembly.
<Ref. to LI-26, WAGON MODEL, REMOVAL, Rear
Combination Light Assembly.>
2) Turn the socket and remove the bulb.
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
1) Visually check the bulb for blow out.
2) Check the bulb specification. <Ref. to LI-2,
SPECIFICATION, General Description.>
3) If NG, replace the bulb with a new part.
Rear Turn Signal Light Bulb
LI-00564
LI-00596
LI-29
LIGHTING SYSTEM