Rear Gate Latch Lock Actuator - Subaru IMPREZA GD 2007 Series Manual

asieps_tobira_IM_US.book 39 ページ ２０１２年１月１７日 火曜日 午後３時４８分
15.Rear Gate Latch Lock
Actuator
A: REMOVAL
1) Remove the rear gate latch assembly. <Ref. to
SL-38, REMOVAL, Rear Gate Latch Assembly.>
2) Loosen the two screws to remove the rear gate
lock actuator.
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
Make sure the lock works properly after installation.
C: INSPECTION
1) Disconnect the rear gate latch lock actuator har-
ness connector.
2) Connect the battery to the rear gate latch lock
actuator terminal.
2 1
Terminal No.
No. 1 (+) and No. 2 (–)
No. 2 (+) and No. 1 (–)
If defective, replace the rear gate latch lock actua-
tor.

Rear Gate Latch Lock Actuator

SL-00187
2 1
SL-00188
Actuator operation
Unlock → Lock
Lock → Unlock
SL-39
SECURITY AND LOCKS