Subaru IMPREZA GD 2007 Series Manual page 4129

asieps_tobira_IM_US.book 33 ページ ２０１２年１月１７日 火曜日 午後３時４８分
Rear Inner Remote
SECURITY AND LOCKS
9. Rear Inner Remote
A: REMOVAL
1) Remove the rear door trim. <Ref. to EI-42, RE-
MOVAL, Rear Door Trim.>
2) Remove the sealing cover. <Ref. to EB-20, RE-
MOVAL, Rear Sealing Cover.>
3) Remove the one screw and two rod joints.
4) Remove the rear inner remote.
SL-00181
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
Make sure that the rear inner remote works proper-
ly after installation.
C: INSPECTION
1) Make sure the rod is not deformed.
2) Make sure the lever and rod move smoothly.
3) Make sure that the child safety locks operate
properly.
SL-33