Subaru IMPREZA GD 2007 Series Manual page 4093

asieps_tobira_IM_US.book 13 ページ ２０１２年１月１７日 火曜日 午後３時４８分
3. Rear Seat
A: REMOVAL
1. WAGON MODEL
1) Remove the bolt to remove the rear seat cush-
ion.
2) Remove the headrest.
3) Remove the luggage floor mat. <Ref. to EI-61,
REMOVAL, Luggage Floor Mat.>
4) Turn over the seat cover to remove the bolt.
5) Remove the rear seat backrest.
Rear Seat
2. SEDAN MODEL
1) Remove the bolt to remove the rear seat cush-
ion.
2) Remove the bolts securing lower position of
backrest and then open the center trunk through
lid.
SE-00023
3) Lift the rear seat backrest and then remove it.
B: INSTALLATION
1. WAGON MODEL
SE-00488
Install in the reverse order of removal.
Tightening torque:
Refer to "COMPONENT" of "General Descrip-
tion". <Ref. to SE-5, REAR SEAT (WAGON
MODEL), COMPONENT, General Descrip-
tion.>
2. SEDAN MODEL
1) Hook and fasten the upper-back side of the rear
seat backrest to the body hook.
SE-00025
SE-13
SEATS
SE-00023
SE-00312
SE-00313