Subaru IMPREZA GD 2007 Series Manual page 4017

asieps_tobira_IM_US.book 34 ページ ２０１２年１月１７日 火曜日 午後３時４８分
LIGHTING SYSTEM
27.Luggage Room Light
A: REMOVAL
1) Disconnect the ground cable from the battery.
2) Remove the lens (A) and mounting screws (B) of
the luggage room light.
(B)
(A)
3) Disconnect the harness connectors and remove
the luggage room light.
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
1. LUGGAGE ROOM LIGHT BULB
1) Visually check the bulb for blow out.
2) Check the bulb specification. <Ref. to LI-2,
SPECIFICATION, General Description.>
3) If NG, replace the bulb with a new part.
Luggage Room Light
2. LUGGAGE ROOM LIGHT SWITCH
Measure the resistance between the luggage room
light terminals.
Switch position
OFF
DOOR
(B)
LI-00042
LI-34
(3) (1)
(2)
LI-00043
Terminal No. Standard
— 1 MΩ or more
1.5±0.5 Ω
1 and 2