Subaru IMPREZA GD 2007 Series Manual page 4179

asieps_tobira_IM_US.book 15 ページ ２０１２年１月１７日 火曜日 午後３時４８分
8. Front Washer Nozzle
A: REMOVAL
1) Remove the washer hose from the washer noz-
zle.
2) Open the clips on the underside of the front hood
with a thin screwdriver or other tool, and remove
the washer nozzle.
B: INSTALLATION
1) Install in the reverse order of removal.
2) Adjust the position of the washer fluid sprayer.
<Ref. to WW-15, ADJUSTMENT, Front Washer
Nozzle.>
C: INSPECTION
• Make sure the nozzle and hose are not clogged.
• Make sure the hose is not bent.
D: ADJUSTMENT
1) Turn the wiper switch to OFF position.
2) While the vehicle is at a standstill, adjust the
washer injection position as shown in the figure.
Injection position:
A: 257 mm (10.12 in)
B: 512 mm (20.16 in)
A
(1)
(1) Nozzle
Front Washer Nozzle
WW-00023
A
B
WW-00161
WW-15
WIPER AND WASHER SYSTEMS