Subaru IMPREZA GD 2007 Series Manual page 3995

asieps_tobira_IM_US.book 12 ページ ２０１２年１月１７日 火曜日 午後３時４８分
LIGHTING SYSTEM
9. Combination Switch (Light)
A: REMOVAL
1) Disconnect the ground cable from the battery.
2) Remove the instrument panel lower cover. <Ref.
to EI-47, REMOVAL, Instrument Panel Assembly.>
3) Remove the screws which secure upper column
cover to lower column cover.
4) Remove the steering column upper cover
mounting screw.
5) Disconnect the connector from the combination
switch.
6) Remove the screws which secure the switch,
then remove the switch.
B: INSTALLATION
Install in the reverse order of removal.
Combination Switch (Light)
C: INSPECTION
Measure the resistance between combination
switch terminals.
WW-00299
1. LIGHTING SWITCH
Switch position
WW-00309
2. DIMMER AND PASSING SWITCH
Switch position
Passing
Low beam
High beam
3. TURN SIGNAL SWITCH
Switch position
LI-00455
Neutral
LI-12
8 7 6 5 4 3 2
17 16 1514131211 10
(A)
(A) Light / turn signal switch connector
Terminal No.
OFF 13, 14 and 16
Tail 14 and 16
Head 13, 14 and 16
Terminal No.
7, 8 and 16
16 and 17
7 and 16
Terminal No.
Left 1 and 2
1, 2 and 3
Right 2 and 3
1
9
LI-00456
Standard
1 MΩ or more
Less than 1 Ω
Less than 1 Ω
Standard
Less than 1 Ω
Less than 1 Ω
Less than 1 Ω
Standard
Less than 1 Ω
1 MΩ or more
Less than 1 Ω