Subaru IMPREZA GD 2007 Series Manual page 4011

asieps_tobira_IM_US.book 28 ページ ２０１２年１月１７日 火曜日 午後３時４８分
LIGHTING SYSTEM
21.Back-up Light Bulb
A: REMOVAL
1. SEDAN MODEL
1) Remove the trunk side trim of rear portion.
2) Turn the socket and remove the bulb.
2. WAGON MODEL
1) Remove the rear combination light assembly.
<Ref. to LI-26, WAGON MODEL, REMOVAL, Rear
Combination Light Assembly.>
2) Turn the socket and remove the bulb.
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
1) Visually check the bulb for blow out.
2) Check the bulb specification. <Ref. to LI-2,
SPECIFICATION, General Description.>
3) If NG, replace the bulb with a new part.
Back-up Light Bulb
LI-00563
LI-00571
LI-28