Subaru IMPREZA GD 2007 Series Manual page 4094

asieps_tobira_IM_US.book 14 ページ ２０１２年１月１７日 火曜日 午後３時４８分
SEATS
2) Tighten the bolts.
3) Hook and secure the seat cushion to the hook on
the bottom part of the rear seat backrest.
Tightening torque:
Refer to "COMPONENT" of "General Descrip-
tion". <Ref. to SE-4, REAR SEAT (SEDAN
MODEL), COMPONENT, General Descrip-
tion.>
C: DISASSEMBLY
1. WAGON MODEL
1) Remove the rear seat. <Ref. to SE-13, WAGON
MODEL, REMOVAL, Rear Seat.>
2) Remove the hog rings (A) behind the seat back-
rest.
Rear Seat
3) Remove the hog rings (A) on the front side of
cushion pad, and then remove the cover.
SE-00312
4) Remove the hog rings (A) on the rear side of the
seat cushion.
SE-00314
5) Remove the hog rings (A), then remove the seat
cushion cover.
2. SEDAN MODEL
1) Remove the rear seat. <Ref. to SE-13, SEDAN
MODEL, REMOVAL, Rear Seat.>
2) Remove two nuts, and then remove the armrest
assembly.
: (A)
SE-00489
SE-14
: (A)
SE-00027
: (A)
SE-00490
: (A)
SE-00491
SE-00141