Subaru IMPREZA GD 2007 Series Manual page 4138

asieps_tobira_IM_US.book 42 ページ ２０１２年１月１７日 火曜日 午後３時４８分
SECURITY AND LOCKS
18.Front Hood Lock Assembly
A: REMOVAL
1) Open the front hood.
2) Remove the bolt. Remove the front hood lock
assembly.
3) Remove the release cable from the front hood
lock assembly.
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
• Apply grease to the movable part.
• Make sure the release cable works properly after
installation.
C: ADJUSTMENT
Loosen the bolt, and adjust the front hood lock as-
sembly while moving it up and down.
D: INSPECTION
1) Check the striker for deformation or abnormal
wear.
2) Check the safety lever for improper movement.
3) Check other levers and the spring for rust forma-
tion and unsmooth movement.
Front Hood Lock Assembly
SL-00190
SL-00191
SL-42