asieps_tobira_IM_US.book 21 ページ 2012年1月17日 火曜日 午後3時48分
4. Security System
A: WIRING DIAGRAM
<Ref. to WI-171, WIRING DIAGRAM, Security System.>
B: ELECTRICAL SPECIFICATION
Contents
Power supply (Backup)
Door switch & rear gate latch
switch (wagon model)
Trunk room light switch
(sedan model)
Impact sensor
Ignition switch (ON)
Security horn relay
Interrupt relay
Ground
Impact sensor
Security indicator light
Impact sensor
Security System
13 12 11 10 9 8 7 6 5 4 3 2 1
26 25 24 23 22 21 20 19 18 17 16 15 14
Terminal No.
2
Battery voltage is constantly present.
6 (INPUT)
Less than 1 V is detected when one of the doors or the rear gate is opened.
7 (INPUT)
Less than 1 V is detected when the trunk lid is opened.
8
10 (INPUT)
Battery voltage is present when the ignition switch is turned to ON.
11 (INPUT)
Battery voltage is detected when the alarm operation is activated.
12 (OUTPUT)
Battery voltage is detected when the alarm is activated.
Less than 10 Ω is continually detected.
14
15
15 (OUTPUT)
Less than 1 V is detected when the alarm is activated.
17
SL-21
SECURITY AND LOCKS
Measuring condition
—
—
—
SL-00478