Subaru IMPREZA GD 2007 Series Manual page 4014

asieps_tobira_IM_US.book 31 ページ ２０１２年１月１７日 火曜日 午後３時４８分
24.High-mounted Stop Light
A: REMOVAL
1. SEDAN MODEL (STANDARD TYPE)
1) Disconnect the ground cable from the battery.
2) Disconnect the connector of high-mounted stop
light from body harness.
3) Remove the bolts, then detach the high-mount-
ed stop light assembly.
2. SEDAN MODEL (WITH BUILT-IN REAR
SPOILER)
1) Disconnect the ground cable from the battery.
2) Remove the bolts, then detach the high-mount-
ed stop light assembly.
3) Disconnect the connector of high-mounted stop
light from body harness.
3. WAGON MODEL
1) Disconnect the ground cable from the battery.
2) Remove the screws (a) and then detach the cov-
er (b).
3) Remove the screws (c) and detach the connec-
tor, then remove the high mounted stop light.
(c)
High-mounted Stop Light
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
1) Visually check the bulb for blow out.
2) If NG, replace the high mounted stop light with a
new part.
LI-00221
LI-00222
(b)
(a)
LI-00716
LI-31
LIGHTING SYSTEM