Subaru IMPREZA GD 2007 Series Manual page 4006

asieps_tobira_IM_US.book 23 ページ ２０１２年１月１７日 火曜日 午後３時４８分
17.Front Fog Light Assembly
A: REMOVAL
1) Disconnect the ground cable from the battery.
2) Disengage the three clips, and then turn over the
lower mud guard.
3) Remove the harness connector.
4) Remove the attachment bolts and remove the
fog light assembly.
B: INSTALLATION
Install in the reverse order of removal.
Front Fog Light Assembly
C: ADJUSTMENT
1. FOG LIGHT BEAM ADJUSTMENT
NOTE:
Before checking the fog light beam level, be sure of
the following:
• The area around the fog light has not sustained
any accident, damage or other type of deformation.
• Vehicle is parked on a level surface.
• The inflation pressure of tires is correct.
• Vehicle's fuel tank is fully filled.
1) Bounce the vehicle several times to normalize
the suspension.
2) Make certain that someone is seated in the driv-
er's seat.
3) Disengage the three clips, and then turn over the
LI-00560
lower mud guard.
LI-00085
LI-23
LIGHTING SYSTEM
LI-00560