Subaru IMPREZA GD 2007 Series Manual page 3950

asieps_tobira_IM_US.book 9 ページ ２０１２年１月１７日 火曜日 午後３時４８分
Clear Memory Mode
IMMOBILIZER (DIAGNOSTICS)
7. Clear Memory Mode
A: OPERATION
1) On the «Main Menu» display screen, select
{Each System Check}.
2) On the «System Selection Menu» display
screen, select {Engine}.
3) Select the [OK] after the information of engine
type is displayed.
4) On the «Engine Diagnosis» display screen, se-
lect {Clear Memory}.
5) When "Done" is shown on the display screen,
turn the ignition switch to OFF, and then Subaru
Select Monitor switch to OFF.
NOTE:
• After the memory has been cleared, the idle air
control solenoid valve must be initialized. To exe-
cute this procedure, turn the ignition switch to ON.
Wait for three seconds before starting the engine.
• For detailed operation procedure, refer to the
"SUBARU SELECT MONITOR OPERATION
MANUAL".
IM(diag)-9