Subaru IMPREZA GD 2007 Series Manual page 4079

asieps_tobira_IM_US.book 15 ページ ２０１２年１月１７日 火曜日 午後３時４８分
6. CENTER SEAT BELT ASSEMBLY RH
AND LH (WAGON MODEL)
1) Remove the rear seat cushion.
2) Remove the bolts, then remove the center seat
belt assembly.
B: INSTALLATION
Install in the reverse order of removal.
CAUTION:
• During installation, make sure that the seat
belts are not twisted.
• After installation, make sure that the seat
belts are smoothly extended and wound.
Tightening torque:
• <Ref. to SB-3, REAR SEAT BELT (SEDAN
MODEL), COMPONENT, General Descrip-
tion.>
• <Ref. to SB-4, REAR SEAT BELT (WAGON
MODEL), COMPONENT, General Descrip-
tion.>
C: INSPECTION
Check for the following, and replace with new parts
if necessary.
• Seat belt is slackened, bent or worn.
• Seat belt is abnormally wound or extended.
• Inner belt is deformed or damaged.
• Seat belt buckle cannot be engaged properly.
Rear Seat Belt
SB-00097
SB-15
SEAT BELT SYSTEM