Subaru IMPREZA GD 2007 Series Manual page 4061

asieps_tobira_IM_US.book 8 ページ ２０１２年１月１７日 火曜日 午後３時４８分
OPTION PARTS
5. Rear Differential Protector
A: REMOVAL
1) Remove the rear exhaust pipe and muffler.
<Ref. to EX(H4SO)-8, Rear Exhaust Pipe.> <Ref.
to EX(H4SO)-9, Muffler.> <Ref. to EX(H4DOTC)-
15, Rear Exhaust Pipe.> <Ref. to EX(H4DOTC)-
17, Muffler.>
2) Remove the differential front member attaching
bolt.
3) Loosen the nuts to remove the rear differential
protector.
4) Remove the rear differential protector.
Rear Differential Protector
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
90 N·m (9.2 kgf-m, 66.4 ft-lb)
NOTE:
Install the protector between the nuts and differen-
tial rear member.
Tightening torque:
OP-00013
70 N·m (7.1 kgf-m, 51.6 ft-lb)
OP-00014
OP-8
OP-00013
OP-00014