Subaru IMPREZA GD 2007 Series Manual page 4148

asieps_tobira_IM_US.book 52 ページ ２０１２年１月１７日 火曜日 午後３時４８分
SECURITY AND LOCKS
26.Security Horn Relay
A: REMOVAL
1) Disconnect the ground cable from the battery.
2) Remove the attachment bolt, and remove the
security horn relay.
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
Measure the security horn relay resistance be-
tween terminals (indicated in the table below) when
connecting terminal No. 4 to battery positive termi-
nal and terminal No. 1 to battery ground terminal.
Current Terminal No.
Powered
2 and 3
No power
(A) Battery
If there is a problem, replace the security horn re-
lay.
Security Horn Relay
SL-00576
Standard
Less than 1 Ω
1 MΩ or more
(A)
SL-00218
SL-52