Subaru IMPREZA GD 2007 Series Manual page 4088

asieps_tobira_IM_US.book 8 ページ ２０１２年１月１７日 火曜日 午後３時４８分
SEATS
B: INSTALLATION
Install in the reverse order of removal.
CAUTION:
After installing the driver's seat, use the Subaru
Select Monitor to confirm that the seat position
sensor LH is operating properly. <Ref. to AB(di-
ag)-29, DISPLAY OF STATUS INFORMATION,
OPERATION, Subaru Select Monitor.>
Tightening torque:
Refer to "COMPONENT" of "General Descrip-
tion". <Ref. to SE-2, FRONT SEAT, COMPO-
NENT, General Description.>
C: DISASSEMBLY
CAUTION:
Refer to "CAUTION" of "General Description"
before starting the work. <Ref. to SE-6, CAU-
TION, General Description.>
1. STANDARD SEAT
1) Remove the seat from vehicle. <Ref. to SE-7,
REMOVAL, Front Seat.>
2) Remove the seat lifter cover using a flat tip
screwdriver and loosen the inner bolt to remove the
seat lifter lever.
3) Remove the reclining lever and seat hinge outer
cover.
Front Seat
4) Remove the seat hinge inner cover.
5) Remove the inner seat belt assembly.
(1) Driver's seat
SE-00290
(2) Passenger's seat
SE-00292
SE-8
SE-00658
(1)
(2)
SE-00659