Subaru IMPREZA GD 2007 Series Manual page 4127

asieps_tobira_IM_US.book 31 ページ ２０１２年１月１７日 火曜日 午後３時４８分
Front Door Latch and Door Lock Actuator Assembly
SECURITY AND LOCKS
7. Front Door Latch and Door
Lock Actuator Assembly
A: REMOVAL
1) Disconnect the ground cable from the battery.
2) Remove the front door trim. <Ref. to EI-41, RE-
MOVAL, Front Door Trim.>
3) Remove the sealing cover. <Ref. to EB-17, RE-
MOVAL, Front Sealing Cover.>
4) Remove the front inner remote. <Ref. to SL-29,
REMOVAL, Front Inner Remote.>
5) Remove the three screws and one bolt.
SL-00179
6) Remove the front door latch & door lock actua-
tor assembly, and disconnect the connector.
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
Make sure the lock works properly after installation.
C: INSPECTION
1) Make sure the rod is not deformed.
2) Make sure the lever and rod move smoothly.
SL-31