Subaru IMPREZA GD 2007 Series Manual page 4019

asieps_tobira_IM_US.book 36 ページ ２０１２年１月１７日 火曜日 午後３時４８分
Glove Box Light
LIGHTING SYSTEM
29.Glove Box Light
A: REMOVAL
1) Disconnect the ground cable from the battery.
2) Remove the glove box. <Ref. to EI-43, REMOV-
AL, Glove Box.>
3) Disconnect the harness connector.
4) Remove the glove box light.
LI-00227
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
1) Visually check the bulb for blow out.
2) Check the bulb specification. <Ref. to LI-2,
SPECIFICATION, General Description.>
3) If NG, replace the bulb with a new part.
LI-36