Subaru IMPREZA GD 2007 Series Manual page 4134

asieps_tobira_IM_US.book 38 ページ ２０１２年１月１７日 火曜日 午後３時４８分
Rear Gate Latch Assembly
SECURITY AND LOCKS
14.Rear Gate Latch Assembly
A: REMOVAL
1) Disconnect the ground cable from the battery.
2) Remove the rear gate trim. <Ref. to EI-57, RE-
MOVAL, Rear Gate Trim.>
3) Remove three bolts.
SL-00186
4) Disconnect the connector, and then remove the
rear gate latch assembly.
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
Make sure the lock works properly after installation.
C: INSPECTION
1) Make sure the rod is not deformed.
2) Make sure that the outer handle and cable move
smoothly.
SL-38