Subaru IMPREZA GD 2007 Series Manual page 4078

asieps_tobira_IM_US.book 14 ページ ２０１２年１月１７日 火曜日 午後３時４８分
SEAT BELT SYSTEM
3. CENTER SEAT BELT ASSEMBLY LH
(SEDAN MODEL)
1) Remove the rear seat cushion. <Ref. to SE-13,
REMOVAL, Rear Seat.>
2) Remove the bolts, then remove the center seat
belt LH assembly.
4. OUTER SEAT BELT ASSEMBLY RH AND
LH (WAGON MODEL)
1) Remove the luggage floor mat. <Ref. to EI-61,
REMOVAL, Luggage Floor Mat.>
2) Remove the rear seat cushion. <Ref. to SE-13,
REMOVAL, Rear Seat.>
3) Remove the side sill rear lower cover. <Ref. to
EI-51, REMOVAL, Lower Inner Trim.>
4) Remove the seat belt lower anchor bolt.
5) Remove the anchor cover. Remove the bolt from
the pillar, and then remove the shoulder anchor.
6) Remove the rear quarter trim. <Ref. to EI-52,
REMOVAL, Rear Quarter Trim.>
Rear Seat Belt
7) Remove the bolt to remove the outer seat belt.
8) Remove the two bolts to remove the adjustable
anchor assembly.
SB-00090
5. SHOULDER SEAT BELT CENTER AS-
SEMBLY (WAGON MODEL)
1) Remove the shoulder anchor bolt, and then re-
move shoulder anchor from the quarter pillar.
SB-00091
2) Remove the quarter trim. <Ref. to EI-52, RE-
MOVAL, Rear Quarter Trim.>
3) Remove the three bolts to remove the seat belt
assembly.
SB-00085
SB-14
SB-00093
SB-00087
SB-00095
SB-00096