Subaru IMPREZA GD 2007 Series Manual page 4143

asieps_tobira_IM_US.book 47 ページ ２０１２年１月１７日 火曜日 午後３時４８分
Immobilizer Control Module
SECURITY AND LOCKS
22.Immobilizer Control Module
A: REMOVAL
NOTE:
• On models equipped with an immobilizer, pre-
pare all registered immobilizer keys.
• When replacing the immobilizer control module,
perform immobilizer registration. At this time, a new
immobilizer key is required. For detailed work pro-
cedures, refer to the "REGISTRATION MANUAL
FOR IMMOBILIZER".
• When not replacing the immobilizer control mod-
ule, it is not necessary to re-register the existing
keys.
1) Disconnect the ground cable from the battery.
2) Remove the instrument panel lower cover. <Ref.
to EI-47, REMOVAL, Instrument Panel Assembly.>
3) Disconnect the connector from immobilizer con-
trol module.
4) Remove the immobilizer control module.
SL-00481
B: INSTALLATION
Install in the reverse order of removal.
SL-47