Subaru IMPREZA GD 2007 Series Manual page 4159

asieps_tobira_IM_US.book 5 ページ ２０１２年１月１７日 火曜日 午後３時４８分
3. Glass Lid
A: REMOVAL
1) Completely close the glass lid, and then open
the sunshade.
2) Remove the cover (A), then remove the nuts (B).
(B)
3) Remove the glass lid carefully.
B: INSTALLATION
Install in the reverse order of removal.
Glass Lid
SUNROOF/T-TOP/CONVERTIBLE TOP (SUNROOF)
C: ADJUSTMENT
1. ADJUSTMENT OF HEIGHT BETWEEN
GLASS LID AND ROOF PANEL
Loosen the glass lid installation nuts, and then ad-
just the height by adding (max: three pieces) or ex-
tracting (min: zero pieces) shims (normally one
piece) which are installed between the glass lid and
the body.
Difference in height between sunroof and roof
panel L:
(A)
SR-00059
SR-5
± ±
2.0 0.5 mm (0.079 0.020 in)
(A) Shim
(B) Glass lid
(A)
L
(B)
SR-00060