Subaru IMPREZA GD 2007 Series Manual page 4182

asieps_tobira_IM_US.book 18 ページ ２０１２年１月１７日 火曜日 午後３時４８分
WIPER AND WASHER SYSTEMS
11.Rear Washer
A: REMOVAL
1) Remove the high-mounted stop light. <Ref. to LI-
31, REMOVAL, High-mounted Stop Light.>
2) Remove the washer hose from the washer noz-
zle.
3) Open the clips on the back of rear gate panel
with a thin screwdriver or other tool, and remove
the washer nozzle.
B: INSTALLATION
1) Install in the reverse order of removal.
2) Adjust the position of the washer fluid sprayer.
<Ref. to WW-18, ADJUSTMENT, Rear Washer.>
C: INSPECTION
• Make sure the nozzle and hose are not clogged.
• Make sure the hose is not bent.
D: ADJUSTMENT
1) Turn the wiper switch to OFF position.
2) While the vehicle is at a standstill, adjust the
washer injection position as shown in the figure.
Injection position:
A: 39 mm (1.54 in)
B: 72°
(1) Nozzle
Rear Washer
WW-00023
(1)
A
B
WW-00054
WW-18