Subaru IMPREZA GD 2007 Series Manual page 3991

asieps_tobira_IM_US.book 8 ページ ２０１２年１月１７日 火曜日 午後３時４８分
LIGHTING SYSTEM
5. Turn Signal Light and Hazard
Light System
A: WIRING DIAGRAM
1. TURN SIGNAL LIGHT AND HAZARD
LIGHT
<Ref. to WI-133, WIRING DIAGRAM, Turn Signal
Light and Hazard Light System.>
B: INSPECTION
1. TURN SIGNAL SWITCH
<Ref. to LI-12, INSPECTION, Combination Switch
(Light).>
2. HAZARD SWITCH
Measure the resistance between terminals of the
hazard switch.
Switch position Terminal No.
OFF 6 and 7
1, 3 and 4
ON
7 and 8
3. TURN SIGNAL AND HAZARD MODULE
Connect the battery and the turn signal light bulb to
the module, as shown in the figure. The module is
properly functioning if it blinks when power is sup-
plied to the circuit.
Turn Signal Light and Hazard Light System
4 3 2 1
8 7 6 5
LI-00002
Standard
Less than 1 Ω
Less than 1 Ω
Less than 1 Ω
LI-00003
LI-8