asieps_tobira_IM_US.book 30 ページ 2012年1月17日 火曜日 午後3時48分
License Plate Light
LIGHTING SYSTEM
23.License Plate Light
A: REMOVAL
1) Disconnect the ground cable from the battery.
2) Remove the license plate light mounting screw
(A) and then remove the lens (B).
(A)
(B)
LI-00220
3) Remove the bulb.
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
1) Visually check the bulb for blow out.
2) Check the bulb specification. <Ref. to LI-2,
SPECIFICATION, General Description.>
3) If NG, replace the bulb with a new part.
LI-30