Subaru IMPREZA GD 2007 Series Manual page 4090

asieps_tobira_IM_US.book 10 ページ ２０１２年１月１７日 火曜日 午後３時４８分
SEATS
12) Remove the headrest bushing.
NOTE:
Push outside to remove it from the inside of seat.
13) Pull out the backrest frame.
14) Remove the lower hog rings (A) on the front
side of seat backrest.
(A)
15) Remove the hog rings (A) at front of seat back,
and then remove the seat back cover from seat
backrest.
16) Remove the hooks (A), and then remove the
seat cushion frame assembly.
(A)
Front Seat
17) Remove the hog rings (A), and then remove the
seat cushion cover from seat cushion pad.
18) Remove the bolt of the sliding adjustment bar
SE-00243
and connecting wire.
19) Remove the bolts, then remove the slide rail.
SE-00244
(A)
SE-00245
SE-00660
SE-10
: (A)
SE-00299
SE-00340
SE-00409