Subaru IMPREZA GD 2007 Series Manual page 4102

asieps_tobira_IM_US.book 6 ページ ２０１２年１月１７日 火曜日 午後３時４８分
SECURITY AND LOCKS
6. SECURITY SYSTEM
(2)
(1)
(1) Horn
(2) Security horn
(3) Security indicator light
(in combination meter)
B: CAUTION
• Before disassembling or reassembling parts, al-
ways disconnect the battery ground cable from bat-
tery. When repairing the audio, control module, etc.
which are provided with memory functions, record
the memory contents before disconnecting the
ground cable from battery. Otherwise, these con-
tents are erased upon disconnection.
• Reassemble the parts in the reverse order of dis-
assembly unless otherwise indicated.
• Adjust the parts to the specifications described in
this manual if so designated.
• Connect the connectors securely during reas-
sembly.
• After reassembly, make sure all the functional
parts operate smoothly.
• The airbag system wiring harness is routed near
electrical parts and switches.
• Do not use electrical test equipment on any air-
bag system wiring harnesses or connector circuits.
• Be careful not to damage the airbag system wir-
ing harness when servicing the ignition key cylin-
der.
General Description
(4)
(3)
(8)
(4) Trunk room light switch (sedan),
rear gate latch switch (wagon)
(5) Door switch
(6) Keyless entry control module
SL-6
(5)
(6)
(7)
(9)
SL-00473
(7) Security horn relay
(8) Interrupt relay
(9) Horn relay (in main fuse box)