Subaru IMPREZA GD 2007 Series Manual page 3974

asieps_tobira_IM_US.book 11 ページ ２０１２年１月１７日 火曜日 午後３時４８分
3. Combination Meter
A: REMOVAL
1) Disconnect the ground cable from the battery.
2) Set the tilt steering at the lowest position.
3) Remove the screws and detach the meter visor.
: (A)
(A) Hook
4) Remove the screws of combination meter and
pull out the meter.
5) Disconnect the connector in the upper area of
combination meter to remove the meter.
CAUTION:
• Be careful not to damage the meters and in-
strument panel.
• Pay particular attention to avoid damaging
the meter glass.
B: INSTALLATION
Install in the reverse order of removal.
CAUTION:
• Make sure the electrical connector is con-
nected securely.
• Make sure that each meter operates normal-
ly.
Combination Meter
IDI00073
IDI00074
IDI-11
INSTRUMENTATION/DRIVER INFO