Subaru IMPREZA GD 2007 Series Manual page 4174

asieps_tobira_IM_US.book 10 ページ ２０１２年１月１７日 火曜日 午後３時４８分
WIPER AND WASHER SYSTEMS
5. Washer Tank and Motor
A: REMOVAL
1) Open the front hood.
2) Disconnect the ground cable from the battery.
3) Remove the front bumper. <Ref. to EI-24, RE-
MOVAL, Front Bumper.>
4) Disconnect hose from the L joint and drain the
washer fluid.
5) Remove the duct clip.
6) Disconnect the connector.
7) Remove the screws and detach the cover.
Washer Tank and Motor
8) Disconnect the hose.
9) Remove the bolts and nuts and remove the
washer tank.
WW-00398
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
6.0 N·m (0.61 kgf-m, 4.4 ft-lb)
C: DISASSEMBLY
WW-00378
Pull out the washer motor from the tank.
WW-00399
(A) Front
(B) Rear
D: ASSEMBLY
1) Assemble in the reverse order of disassembly.
2) Confirm that water does not leak from installa-
tion area of motor.
WW-00400
WW-10
WW-00401
WW-00285
(A) (B)
WW-00286