Subaru IMPREZA GD 2007 Series Manual page 3965

asieps_tobira_IM_US.book 2 ページ ２０１２年１月１７日 火曜日 午後３時４８分
INSTRUMENTATION/DRIVER INFO
1. General Description
A: SPECIFICATION
Speedometer
Engine coolant temperature gauge
Fuel gauge
Tachometer
Turn signal indicator light
Charge indicator light
Oil pressure warning light
ABS warning light
Malfunction indicator light
HI-beam indicator light
Door open warning light
Seat belt warning light
Brake fluid and parking brake warning light
AWD indicator light
Combination meter
AIRBAG warning light
Meter illumination light
AT OIL TEMP. warning light
Security indicator light
Cruise set indicator light
Cruise indicator light
Low fuel warning light
AT select lever position indicator light
Intercooler water spray warning light
Rear differential oil temperature warning light
Driver's control center differential indicator light
REV indicator light
Light illumination indicator light
LCD back light
B: CAUTION
• Be careful not to damage the meters and instrument panel.
• Be careful not to damage the meter glass.
• Make sure the electrical connector is connected securely.
• After installation, make sure that each meter operates normally.
• Use gloves to avoid damage and getting fingerprints on the glass surface and meter surfaces.
• Do not apply an excessive force on the printed circuit.
• Do not drop or otherwise apply impact.
C: PREPARATION TOOL
1. GENERAL TOOL
TOOL NAME
Circuit tester
General Description
Model Except for STI model
14 V — 3 W, 14 V — 2 W
Used for measuring resistance and voltage.
IDI-2
STI model
Electric pulse type Stepping motor type
Cross coil type Stepping motor type
Cross coil type Stepping motor type
Electric pulse type Stepping motor type
14 V — 1.4 W
14 V — 1.4 W
LED
LED
LED
14 V — 1.4 W
LED
LED
14 V — 1.4 W
LED
LED
LED
LED
14 V — 1.4 W
14 V — 1.4 W
LED
14 V — 100 mA
—
—
—
—
—
14 V — 1.4 W
REMARKS
LED
LED
LED
LED
—
LED
—
LED
LED
—
LED
LED
LED
LED
LED
LED