Keyless Entry - Subaru IMPREZA GD 2007 Series Manual

asieps_tobira_IM_US.book 11 ページ ２０１２年１月１７日 火曜日 午後３時４８分
3. Keyless Entry System
A: WIRING DIAGRAM

1. KEYLESS ENTRY

<Ref. to WI-168, WIRING DIAGRAM, Keyless Entry System.>
B: ELECTRICAL SPECIFICATION
1. KEYLESS ENTRY CONTROL MODULE
Contents
Turn signal light LH
Power supply (Backup)
Keyless buzzer
Door unlock switch
Door lock switch
Door switch and rear gate latch switch
Trunk latch switch
Key warning switch
Ignition switch (ON)
Turn signal light RH
Ground
Body integrated unit
Body integrated unit
Horn relay
Power supply (Backup)
Keyless Entry System
13 12 11 10 9 8 7 6 5 4 3 2 1
26 25 24 23 22 21 20 19 18 17 16 15 14
Terminal No.
Battery voltage is detected when the transmitter UNLOCK/DISARM button
1 (OUTPUT)
or the LOCK/ARM button is pressed.
2 Battery voltage is constantly present.
0 V is detected when the transmitter UNLOCK/DISARM button or the
3 (OUTPUT)
LOCK/ARM button is pressed.
4 (INPUT) 0 V is detected when the door lock switch is operated.
5 (INPUT) 0 V is detected when the door lock switch is operated.
6 (INPUT) 0 V is detected when one of the doors or the rear gate is opened.
7 (INPUT) 0 V is detected when the trunk is opened.
9 (INPUT) Battery voltage is present when the key is inserted into the ignition switch.
10 (INPUT) Battery voltage is present when the ignition switch is turned to ON.
Battery voltage is detected when the transmitter UNLOCK/DISARM button
13 (OUTPUT)
or the LOCK/ARM button is pressed.
14 0 V is constantly present.
Battery voltage is detected when pressing the transmitter UNLOCK/DISARM
18 (OUTPUT)
button.
19 (OUTPUT) Battery voltage is detected when pressing the transmitter LOCK/ARM button.
When the transmitter LOCK/ARM button is pressed 3 times within 5 seconds,
24 (OUTPUT)
0 V is detected.
26 Battery voltage is constantly present.
SL-11
SECURITY AND LOCKS
Measuring condition
SL-00478