Subaru IMPREZA GD 2007 Series Manual page 4015

asieps_tobira_IM_US.book 32 ページ ２０１２年１月１７日 火曜日 午後３時４８分
LIGHTING SYSTEM
25.Spot Map Light
A: REMOVAL
1) Disconnect the ground cable from the battery.
2) Remove the lens (A) and spot map light mount-
ing screws (B).
(A)
3) Disconnect the harness connectors and remove
the spot map light.
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
1. SPOT MAP LIGHT BULB
1) Visually check the bulb for blow out.
2) Check the bulb specification. <Ref. to LI-2,
SPECIFICATION, General Description.>
3) If NG, replace the bulb with a new part.
2. SPOT MAP LIGHT SWITCH
Measure the resistance between the spot map light
terminals.
Switch position Terminal No.
OFF 1 and 2
ON 1 and 2
Spot Map Light
LI-00224
(B)
LI-00225
Standard
1 MΩ or more
18±5.4 Ω
LI-32