Subaru IMPREZA GD 2007 Series Manual page 4173

asieps_tobira_IM_US.book 9 ページ ２０１２年１月１７日 火曜日 午後３時４８分
2) Make sure the wiper rubber is securely fastened
to the pull stopper (A).
2. REAR
A B
1) Insert the wiper rubber into claw (B).
A
2) Insert the wiper rubber until its top end protrudes
approx. 20 mm (0.79 in) from stopper (D).
20 mm ( 0.79 in. )
Wiper Blade
WW-00037
C D
WW-00421
B
WW-00145
D
WW-00146
WW-9
WIPER AND WASHER SYSTEMS
3) Insert the wiper rubber into claw (A).
A
E: INSPECTION
1) When the wiper does not operate properly, in-
spect the following item.
• Make sure the movable part of blade assembly
moves smoothly.
• Make sure the wiper rubber is not deformed or
damaged.
2) Replace with a new part if damage is found.
WW-00147