asieps_tobira_IM_US.book 17 ページ 2012年1月17日 火曜日 午後3時48分
6. Fuel Gauge
A: REMOVAL
NOTE:
Since the meter main assembly of STI model can-
not be disassembled. Do not remove or inspect the
fuel gauge as a single unit.
Disassemble the combination meter, and then re-
move the engine coolant temperature gauge and
fuel gauge assembly. <Ref. to IDI-12, DISASSEM-
BLY, Combination Meter.>
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
Measure the fuel gauge resistance.
UNIT
Terminals
IGN and GND terminal
IGN and UNIT terminal
UNIT and GND terminal
Replace the engine coolant temperature gauge
and fuel gauge assembly if defective.
If OK, replace the combination meter printed circuit.
Fuel Gauge
IGN
GND
IDI00007
Resistance
170±10 Ω
35±10 Ω
136±10 Ω
IDI-17
INSTRUMENTATION/DRIVER INFO