Subaru IMPREZA GD 2007 Series Manual page 3975

asieps_tobira_IM_US.book 12 ページ ２０１２年１月１７日 火曜日 午後３時４８分
INSTRUMENTATION/DRIVER INFO
C: DISASSEMBLY
1. EXCEPT FOR STI MODEL
CAUTION:
Use gloves to avoid damage and getting fingerprints on the glass surface and meter surfaces.
1) Disengage the claw (F) to remove the inner case (B) from the back cover (A).
2) Disengage the claw (G) to remove the meter glass (E), reflector (D), and window plate (C) from the inner
case (B).
(E)
(F)
(G)
3) Pull up claw (A) in portion (B) of combination
meter printed circuit (C) with combination pliers.
Push out the speedometer and tachometer assem-
bly (D) and fuel gauge and engine coolant temper-
ature gauge assembly (E) using the hole (F).
4) Pull up the claw in the center of the combination
meter printed circuit (C), and remove the printed
circuit from the case (G).
(B)
(G)
(E)
(D)
Combination Meter
(C)
(D)
(C)
(A)
(F)
IDI00076
IDI-12
(A)
(B)
IDI00175