Subaru IMPREZA GD 2007 Series Manual page 4161

asieps_tobira_IM_US.book 7 ページ ２０１２年１月１７日 火曜日 午後３時４８分
C: DISASSEMBLY
1) Remove the sunroof frame.
2) Remove the rail stopper (A).
(A)
3) Pull out the sunshade (A) from the sunroof
frame.
(A)
D: ASSEMBLY
Assemble in the reverse order of disassembly.
Sunroof Assembly
SUNROOF/T-TOP/CONVERTIBLE TOP (SUNROOF)
E: INSPECTION
1. CHECK FOR MOVING LOAD OF SUN-
SHADE
1) Attach a spring scale to sunshade edge using a
cloth.
SR-00066
2) Pull the spring scale to measure moving load of
the sunshade.
Moving load of the rear sunshade:
Less than 24.5
NOTE:
Moving load is larger at the beginning of pulling a
spring scale, so take a spring scale reading while
sunshade sliding smoothly.
3) If moving load exceeds specifications, check the
SR-00067
glass lid, sunshade and guide rail assembly for im-
proper installation.
SR-7
SR-00068
± ± ±
4.9 N (2.5 0.5 kgf, 5.5 1.1 lbf)